Four Link Suspension


Four Link Race Suspension

Drag race four link suspension use spherical rod ends for strength and extreme adjustability. The drag race bars when set up correctly form an open ended triangle to permit you to change what is called the cars “instant center” (theoretical point that the tires push)to achieve the ultimate in traction control.

Frame modifications are required to install a 4 link. Unless you plan to turn quarter mile times faster than high 9s you may wish to consider Ladder link bars (AKA double adjustable ladder bars) as they are much easier to install and set up. I have driven my coupe into the 9s using stock leaf springs and ladder bars. Yes a 4 Link will give better traction than ladder bars but only if you spend considerable time to adjust and readjust them.

Application: Universal fit drag race traction bars. Use with coil-overs

The drawing package includes:

Six (6) big 11×17” pages showing you how make all parts, assemble them and then install the finished product successfully on your car. In addition to the drawings listed below you also will receive a Bill of materials and Full installation instructions

  • General assembly
  • Front mounting plates (2 types)
  • Rear mounting plates
  • Lower coil over shock mounts
  • Bars


I am presently offering Two FREE bonus pages with these plans showing you how to design and install a Panhard bar on your rear axle to keep the rear end safely located.

06 4 link pp  06 4 link ppp
Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter
  • Category Activity

  • New Posts