Ladder Bars


 Ladder Bars

Ladder bars have been around for a long time and for good reason. They Work!

Many people pass on ladder bars and go right for the more fashionable 4 link suspension.

Yes a 4 Link will give better traction than ladder bars but only if you spend considerable time to adjust and readjust them. Few people need the extra traction and fewer yet spend the time to learn how to adjust them. Major frame modifications are required to install the 4 link and you have 4 times as many rod end to replace when they wear out.

These plans show you how to make and install ladder bars and Ladder link bars (AKA double adjustable ladder bars). Setup is easy and as I mentioned in the first sentence, They work!

FYI  I have driven my coupe to quarter mile times in the 9s using stock leaf springs and ladder link bars.

Application: Universal fit drag race traction bars. Use with leaf, coil springs, or coil-overs

Options: Drawings will produce standard ladder or ladder-link bars for use with rectangular or round tube front cross members

The drawing package includes:

Six (6) big 11×17” pages showing you how make all parts, assemble them and then install the finished product successfully on your car. In addition to the drawings listed below you also will receive a Bill of materials and Full installation instructions.

  •         General assembly
  •         Front mounting plates (2 types)
  •         Rear mounting plates (2 parts)
  •         Safety loop (3 parts)
  •         Adjuster


I am presently offering Two FREE bonus pages with these plans showing you how to design and install a Panhard bar on your rear axle to keep the rear end safely located.


09 ladder link pp09 ladder race ppp

Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter
  • Category Activity

  • New Posts